* specifies the function argument type in commands.h compared to leaving
it unspecified. all the functions in cmd_t must have arg_t as it's
argument.
* changes to commands.h will now trigger a rebuild - this restores old
behavior prior to 12efa0e
* cg_quit now uses it's argument as exit status
* DestroyNotify invokes cg_quit rather than calling exit directly.
* Explicitly pass EXIT_SUCCESS to cgquit in keybinding
Co-authored-by: Berke Kocaoğlu <berke.kocaoglu@metu.edu.tr>
now that imlib2 (v1.7.5) is able to load the first frame of an
animated-webp file, we no longer need the `is_webp` check to bypass
imlib2.
ref: https://phab.enlightenment.org/T8964
* fix compile error
* use variable instead of macro
* Revert "use variable instead of macro"
This reverts commit a14ef0b231c50e49906761010a4d4231ce4e3e36.
* use local variable instead of macro
* Revert "use local variable instead of macro"
This reverts commit 7e049d55d94f5c003d90e1a10187356f6a7f54b2.
When rendering images, destination image width and height may become
zero due to float-to-int conversion after zoom calculation, later
crashing when creating an image using those dimensions. This sets
a minimum of 1 to both variables.
Closes#82
* fix: send implicit_mod to process_bindings
this solves the edge case where someone might have `ShiftMask + A` in
their keybindings compared to a plain `A`.
Closes: https://github.com/nsxiv/nsxiv/pull/166#issuecomment-978853136
* code-style: smuggle small style fix in
win_draw_bar now mimics autoreload_nop.c functions
with this patch certain gif images will fail to play. one other problem
here is that it suddenly breaks the loop without free-ing data and rows,
leading to a memory leak.
regardless, this needs to be investigated further.
here's an example image where this happens:
https://i.postimg.cc/SQf1TJJg/awoo-study.gif
This reverts commit cca7834e67.
by default imlib2 uses a 4mb cache, which is quite small. this allows
users who have more memory to spare to set a bigger cache size and avoid
reloading an already viewed image if it fits into the cache.
Co-authored-by: Berke Kocaoğlu <berke.kocaoglu@metu.edu.tr>
with the exception of arrays, all other var names in config.h are in ALL
CAPS. since keyhandler_abort is an unreleased feature, it should be okay
to rename it for consistency.
though.. in the future we should be more careful about naming when
adding new vars to config.h (or the codebase in general.)
the goal here to mark functions and variables not used outside the
translation unit as static. main reason for this is cleanliness. however
as a side-effect this can help compilers optimize better as it now has
guarantee that a certain function won't be called outside of that
translation unit.
one other side-effect of this is that accessing these vars/function from
config.h is now different.
if one wants to access a static var/func from different translation unit
in config.h, he would have to create a wrapper function under the right
ifdef. for static functions one would also need to forward declare it.
here's a dummy example of accessing the function `run_key_handler` from
config.h under _MAPPINGS_CONFIG
```
static void run_key_handler(const char *, unsigned);
bool send_with_ctrl(arg_t key) {
run_key_handler(XKeysymToString(key), ControlMask);
return false;
}
```
while i was initially against this since it can be done via `xargs -0`.
the problem with this approach is that there's a limit to how many args
a command can recieve, leading to problem like this [0] when opening
large (1k~) amount of images.
there's no limit on how big stdin can be, so being able to read a
null-separated list from stdin doesn't have this problem.
[0]: https://github.com/ranger/ranger/pull/2307#issuecomment-818683515
this allows users to configure navigation width from config.h. it also
allows disabling the navigation function entirely by using a 0 width.
one extra functionality this adds is being able to define an absolute
width (in pixels) instead of just percentage via `NAV_IS_REL`.
Co-authored-by: NRK <nrk@disroot.org>
with this change `-0` is turned into a more generic switch which can be
used to send NULL-separated file-list to the key-handler as well.
this also means `-0` no longer implicitly enables `-o`
Closes: https://github.com/nsxiv/nsxiv/issues/140
Adds a set of config vars to control window fg/bg, bar fg/bg, mark
color and bar font. This allows everything that can be done from
.Xresources to be configurable from config.h.
Co-authored-by: N-R-K <79544946+N-R-K@users.noreply.github.com>
* tns_clean_cache: remove unused function arg
* remove malloc casting
* improve consistency
use sizeof(T) at the end
* avoid comparing integers of different signedness
* use Window type for embed and parent
* remove unnecessary comparisons
* remove cpp style comments
* improve consistency: remove comma from the end of enumerator list
* Removed useless _IMAGE_CONFIG defines
* consistency: use the same order as snprintf
* Resolve c89 warnings
Co-authored-by: uidops <uidops@protonmail.com>
Co-authored-by: Arthur Williams <taaparthur@gmail.com>
this code snippet was introduced in
2703809a23
but does not seem to be needed.
from what i can tell this is some sort of hack that might've been needed
back when we didn't bypass imlib2 when loading webp.
Ctrl-Button1 now has a relative drag using the XC_fleur cursor.
XC_fleur is normally the cursor for "size all" action, which has 4
arrows pointing to 4 directions.
Co-authored-by: NRK <nrk@disroot.org>
if `multi.cap` is >0 that means `multi.frames` has already been malloc-ed. by
unconditionally malloc-ing again, we're losing all the old memory.
this makes it so we're only malloc-ing (or realloc-ing) when needed.
This reverts commit c7ca547b55.
cd710f5 fixed the issue with embedding into a parent that has alpha and
partially reverted c7ca547
this commit fully reverts c7ca547 , as these changes aren't needed for
embedding into an alpha-parent.
Before all the predated commands where kept in an array and their
indexes were used in bindings. This meant that users couldn't add their
own functions from the config file. Now key/mouse bindings have been
changed to to store the function ptr (wrapped in a cmd_t struct to also
store the mode) directly instead.
General cleanup done in this commit:
Defined `MODE_ALL` instead of using magic number.
For example, suppose one had bindings like:
{ 0, XK_q, g_quit, None },
{ ShitMask, XK_q, {quit_err}, None }
{ ControlMask, XK_q, {quit_err, .mode=MODE_IMAGE}, None }
The existing binding `q` has been left unchanged and is defined the same
way. However, the new hypothetical binding `Shift-q` can be used to call
the custom function quit_err in any mode (default). `Ctrl-q` on the
other hand will be called only on image mode.
Closes#50
Previously, the value of imgcursor was determined by where a pointer
binding was set to a ci_cursor_navigate. If it was then the pointer
would change to left/right arrows depending on the position relative to
the window. Now the user has full control of over it which also allows
them to preserve the behavior in case they wrap the function.
* Fix regression introduced in c7ca547 which made nsxiv not start in
non-TrueColor X server.
* Introduce a new fix for embedding into tabbed-alpha.
* Fixes a visual glitch from original sxiv when drawing transparent images in 8
bit depth. In 8 bit PseudoColor, `.pixel` is just an index into the 256
defined colors and thus trying to extract rgb bits from it would result in
visual glitch. The values `.color.red` on the other hand and so on are always
integers between 0 and 0xFFFF representing the color as expected.
* Use XColor for win_bg/fg and mrk_fg
Co-authored-by: NRK <nrk@disroot.org>
* remove duplicate comment
* remove empty tabs and blank lines
* move macros and globals ontop
* comment to seprate function implementation
* fix alignment
* switch to *argv[] similar to other suckless code
* kill all empty last lines
* append comment to endif
* reuse existing ARRLEN macro
* comment fall through
* use while (true) everywhere
Co-authored-by: NRK <nrk@disroot.org>
libXft and libfontconfig are now optional dependencies which can be
disabled via `HAVE_LIBFONTS=0`. Disabling them means disabling the
statusbar. This also does not search for freetype2 header if disabled.
Co-authored-by: NRK <nrk@disroot.org>
Currently when running the key-handler the statusbar shows a
"Running key-handler..." message, but there's no indication of the prefix key
being pressed.
There's a slight functional benefit of this patch in the sense
that users can visually tell if the key-handler is listening on input or if the
key-handler has been aborted or not.
* Remove non-POSIX extensions and commands
* Drop autodetection in favor of OPT_DEP_DEFAULT
* Use += for LDLIBS as some BSD distros need to add extra flags
* Change DOCPREFIX -> EGPREFIX
* Use ?= for MANPREFIX and EGPREFIX
* Update docs
With this, we should have a stable build system. No further significant
changes should be needed.
