mykb/docs/luks2.md

LUKS2 fully encrypted Arch-Linux

As the Key-derivation functions for LUKS1 are lacking but GRUB normally only supports LUKS1, additional steps are required to get a working fully encrypted LUKS2 encrypted hard drive. The basic process is similar to a LUKS1 encrypted hard-drive but afterwards before the reboot into your installed OS additional measures need to be taken. This works only with UEFI-systems.

In this tutorial we're assuming you want to install everything to /dev/sda and an ext4 FS. BTRFS requires additional steps to my knowledge.

Boot into ISO, create LVM and mount

We want three partitions: sda1: 1M, sda2: 500M (your EFI), and the rest for your encrypted hard-drive. Create partition table via cfdisk or similar tools.

Create LVM

cryptsetup luksFormat /dev/sda3
cryptsetup open /dev/sda3 cryptlvm
pvcreate /dev/mapper/cryptlvm
vgcreate vg /dev/mapper/crypylvm

Create your wanted partitions. Ergo something similar to:

lvcreate -L 8G vg -n swap
lvcreate -L 32G vg -n root
lvcreate -l 100%FREE vg -n home

and mkfs them:

mkfs.ext4 /dev/vg/root
mkfs.ext4 /dev/vg/home
mkswap /dev/vg/swap

and finally mount them. EFI should be mounted to /mnt/efi

mount /dev/vg/root /mnt
mount --mkdir /dev/vg/home /mnt/home
swapon /dev/vg/swap

mount --mkdir /dev/sda2 /mnt/efi

Continue with your normal Arch install:

Note the lack of grub in the pacstrap, we will build this later

pacstrap -K /mnt base base-devel linux linux-firmware lvm2 efibootmgr networkmanager neovim ...
genfstab -U >> /mnt/etc/fstab
arch-chroot /mnt
echo YourHostName > /etc/hostname
nvim /etc/locale-gen
locale-gen
ln -sf /usr/share/zoneinfo/Europe/Zurich /etc/localtime
hwclock --systohc
passwd

Edit /edit/mkinitcpio.conf to support encryption

In /etc/mkninitcpio.conf edit the HOOKS:

HOOKS=(base __udev__ autodetect modconf kms keyboard keymap consolefont block __encrypt__ __lvm2__ filesystems fsck)

and rebuild initramfs:

mkinitcpio -P

Create new user, download AUR helper, and install grub-improved-luks2-git

useradd -m -G wheel alex
passwd alex

Give him sudo permissions: in /etc/sudoers add:

%wheel ALL=(ALL) ALL

Now install paru or equivalent AUR helper:

su - alex
git clone https://aur.archlinux.org/paru
cd paru
makepkg -si
paru -S grub-improved-luks2-git

We now have a patched GRUB installed and can continue as if we would encrypt using LUKS1 for now:

Edit /etc/default/grub and grub-install

Get encrypted partition UUID into the /etc/default/grub via

ls -l /dev/disk/by-uuid >> /etc/default/grub

and adjust two things in the file:

GRUB_ENABLE_CRYPTODISK=y

and

GRUB_CMDLINE_LINUX="... cryptdevice=UUID=device-UUID:cryptlvm ..."

and recilace "device-UUID" with the uuid we got from the previous ls command. Of course remove all the trailing ls output.

grub-install --target=x86_64-efi --efi-directory=/efi --bootloader-id=GRUB --recheck
grub-mkconfig -o /boot/grub/grub.cfg

LUKS2 support

Now create an additional file in /boot/grub/grub-pre.cfg with the follwing content:

set crypto_uuid=UUID
cryptomount -u $crypto_uuid
set root=lvm/vg-root
set prefix=($root)/boot/grub
insmod normal
normal

and replace UUID with the same UUID as before, (again, a ls -l /dev/disk/by-uuid >> /boot/grub/grub-pre.cfg can help here)

Now we can overwrite our previously generated grubx64.efi with a luks2 compatible one:

grub-mkimage -p /boot/grub -O x86_64-efi -c /boot/grub/grub-pre.cfg -o /tmp/grubx64.efi lvm luks2 part_gpt cryptodisk gcry_rijndael argon2 gcry_sha256 ext2
install -v /tmp/grubx64.efi /efi/EFI/GRUB/grubx64.efi

We should now be done. exit, umount -R /mnt, and reboot into GRUB to see whether everything worked. This still requires you to enter your passphrase twice but can be alleviated just as with the LUKS1 case: https://wiki.archlinux.org/title/Dm-crypt/Device_encryption#With_a_keyfile_embedded_in_the_initramfs