dotfiles/.config/mpv/input.conf

# mpv keybindings
#
# Location of user-defined bindings: ~/.config/mpv/input.conf
#
# Lines starting with # are comments. Use SHARP to assign the # key.
# Copy this file and uncomment and edit the bindings you want to change.
#
# List of commands and further details: DOCS/man/input.rst
# Liut of special keys: --input-keylist
# Keybindings testing mode: mpv --input-test --force-window --idle
#
# Use 'ignore' to unbind a key fully (e.g. 'ctrl+a ignore').
#
# Strings need to be quoted and escaped:
#   KEY show-text "This is a single backslash: \\ and a quote: \" !"
#
# You can use modifier-key combinations like Shift+Left or Ctrl+Alt+x with
# the modifiers Shift, Ctrl, Alt and Meta (may not work on the terminal).
#
# The default keybindings are hardcoded into the mpv binary.
# You can disable them completely with: --no-input-default-bindings

# Developer note:
# On compilation, this file is baked into the mpv binary, and all lines are
# uncommented (unless '#' is followed by a space) - thus this file defines the
# default key bindings.

# If this is enabled, treat all the following bindings as default.
#default-bindings start

#MBTN_LEFT     ignore              # don't do anything
#MBTN_LEFT_DBL cycle fullscreen    # toggle fullscreen
#MBTN_RIGHT    cycle pause         # toggle pause/playback mode
#MBTN_BACK     playlist-prev       # skip to the previous file
#MBTN_FORWARD  playlist-next       # skip to the next file

# Mouse wheels, touchpad or other input devices that have axes
# if the input devices supports precise scrolling it will also scale the
# numeric value accordingly
#WHEEL_UP      seek 10          # seek 10 seconds forward
#WHEEL_DOWN    seek -10         # seek 10 seconds backward
#WHEEL_LEFT    add volume -2
#WHEEL_RIGHT   add volume 2

## Seek units are in seconds, but note that these are limited by keyframes
#RIGHT seek  5                          # seek 5 seconds forward
#LEFT  seek -5                          # seek 5 seconds backward
#UP    seek  60                         # seek 1 minute forward
#DOWN  seek -60                         # seek 1 minute backward
# Do smaller, always exact (non-keyframe-limited), seeks with shift.
# Don't show them on the OSD (no-osd).
l no-osd seek  1 exact       # seek exactly 1 second forward
h no-osd seek -1 exact       # seek exactly 1 second backward
k no-osd seek  5 exact       # seek exactly 5 seconds forward
j no-osd seek -5 exact       # seek exactly 5 seconds backward
#Ctrl+LEFT   no-osd sub-seek -1         # seek to the previous subtitle
#Ctrl+RIGHT  no-osd sub-seek  1         # seek to the next subtitle
#Ctrl+Shift+LEFT sub-step -1            # change subtitle timing such that the previous subtitle is displayed
#Ctrl+Shift+RIGHT sub-step 1            # change subtitle timing such that the next subtitle is displayed
#Alt+left  add video-pan-x  0.1         # move the video right
#Alt+right add video-pan-x -0.1         # move the video left
#Alt+up    add video-pan-y  0.1         # move the video down
#Alt+down  add video-pan-y -0.1         # move the video up
Alt++     add video-zoom   0.1         # zoom in
Alt+-     add video-zoom  -0.1         # zoom out
Alt+ENTER run "openfilebrowser" "${=path}"
#Alt+BS set video-zoom 0 ; set video-pan-x 0 ; set video-pan-y 0 # reset zoom and pan settings
#PGUP add chapter 1                     # seek to the next chapter
#PGDWN add chapter -1                   # seek to the previous chapter
#Shift+PGUP seek 600                    # seek 10 minutes forward
#Shift+PGDWN seek -600                  # seek 10 minutes backward
[ add speed -0.1
] add speed 0.1                   # increase the playback speed
{ multiply speed 0.5                   # halve the playback speed
} multiply speed 2.0                   # double the playback speed
#BS set speed 1.0                       # reset the speed to normal
#Shift+BS revert-seek                   # undo the previous (or marked) seek
#Shift+Ctrl+BS revert-seek mark         # mark the position for revert-seek
#q quit
#Q quit-watch-later                     # exit and remember the playback position
#q {encode} quit 4
#ESC set fullscreen no                  # leave fullscreen
#ESC {encode} quit 4
#p cycle pause                          # toggle pause/playback mode
#. frame-step                           # advance one frame and pause
#, frame-back-step                      # go back by one frame and pause
#SPACE cycle pause                      # toggle pause/playback mode
#> playlist-next                        # skip to the next file
#ENTER playlist-next                    # skip to the next file
#< playlist-prev                        # skip to the previous file
#O no-osd cycle-values osd-level 3 1    # toggle displaying the OSD on user interaction or always
#o show-progress                        # show playback progress
#P show-progress                        # show playback progress
#i script-binding stats/display-stats   # display information and statistics
#I script-binding stats/display-stats-toggle # toggle displaying information and statistics
#` script-binding console/enable        # open the console
#z add sub-delay -0.1                   # shift subtitles 100 ms earlier
#Z add sub-delay +0.1                   # delay subtitles by 100 ms
#x add sub-delay +0.1                   # delay subtitles by 100 ms
#ctrl++ add audio-delay 0.100           # change audio/video sync by delaying the audio
#ctrl+- add audio-delay -0.100          # change audio/video sync by shifting the audio earlier
#Shift+g add sub-scale +0.1             # increase the subtitle font size
#Shift+f add sub-scale -0.1             # decrease the subtitle font size
#9 add volume -2
#/ add volume -2
#0 add volume 2
#* add volume 2
#m cycle mute                           # toggle mute
#1 add contrast -1
#2 add contrast 1
#3 add brightness -1
#4 add brightness 1
#5 add gamma -1
#6 add gamma 1
#7 add saturation -1
#8 add saturation 1
#Alt+0 set current-window-scale 0.5     # halve the window size
#Alt+1 set current-window-scale 1.0     # reset the window size
#Alt+2 set current-window-scale 2.0     # double the window size
#d cycle deinterlace                    # toggle the deinterlacing filter
#r add sub-pos -1                       # move subtitles up
#R add sub-pos +1                       # move subtitles down
#t add sub-pos +1                       # move subtitles down
#v cycle sub-visibility                 # hide or show the subtitles
#Alt+v cycle secondary-sub-visibility   # hide or show the secondary subtitles
#V cycle sub-ass-vsfilter-aspect-compat # toggle stretching SSA/ASS subtitles with anamorphic videos to match the historical renderer
#u cycle-values sub-ass-override "force" "no" # toggle overriding SSA/ASS subtitle styles with the normal styles
#j cycle sub                            # switch subtitle track
#J cycle sub down                       # switch subtitle track backwards
#SHARP cycle audio                      # switch audio track
#_ cycle video                          # switch video track
#T cycle ontop                          # toggle placing the video on top of other windows
#f cycle fullscreen                     # toggle fullscreen
#s screenshot                           # take a screenshot of the video in its original resolution with subtitles
#S screenshot video                     # take a screenshot of the video in its original resolution without subtitles
#Ctrl+s screenshot window               # take a screenshot of the window with OSD and subtitles
#Alt+s screenshot each-frame            # automatically screenshot every frame; issue this command again to stop taking screenshots
#w add panscan -0.1                     # decrease panscan
#W add panscan +0.1                     # shrink black bars by cropping the video
#e add panscan +0.1                     # shrink black bars by cropping the video
#A cycle-values video-aspect-override "16:9" "4:3" "2.35:1" "-1" # cycle the video aspect ratio ("-1" is the container aspect)
#POWER quit
#PLAY cycle pause                       # toggle pause/playback mode
#PAUSE cycle pause                      # toggle pause/playback mode
#PLAYPAUSE cycle pause                  # toggle pause/playback mode
#PLAYONLY set pause no                  # unpause
#PAUSEONLY set pause yes                # pause
#STOP quit
#FORWARD seek 60                        # seek 1 minute forward
#REWIND seek -60                        # seek 1 minute backward
#NEXT playlist-next                     # skip to the next file
#PREV playlist-prev                     # skip to the previous file
#VOLUME_UP add volume 2
#VOLUME_DOWN add volume -2
#MUTE cycle mute                        # toggle mute
#CLOSE_WIN quit
#CLOSE_WIN {encode} quit 4
#ctrl+w quit
#E cycle edition                        # switch edition
#l ab-loop                              # set/clear A-B loop points
ctrl+l cycle-values loop-playlist yes no ; show-text "${?=loop-playlist==inf:Playlist looping enabled}${?=loop-playlist==no:Playlist looping disabled}"
L cycle-values loop-file "inf" "no"    # toggle infinite looping
#ctrl+c quit 4
#DEL script-binding osc/visibility      # cycle OSC visibility between never, auto (mouse-move) and always
#ctrl+h cycle-values hwdec "auto" "no"  # toggle hardware decoding
#F8 show-text ${playlist}               # show the playlist
#F9 show-text ${track-list}             # show the list of video, audio and sub tracks

#
# Legacy bindings (may or may not be removed in the future)
#
#! add chapter -1                       # seek to the previous chapter
#@ add chapter 1                        # seek to the next chapter

#
# Not assigned by default
# (not an exhaustive list of unbound commands)
#

# ? cycle sub-forced-only               # toggle DVD forced subs
# ? stop                                # stop playback (quit or enter idle mode)