bthandler/bt

261 lines
10 KiB
Plaintext
Raw Normal View History

#!/bin/sh
SCAN_PERIOD=5
AUTOTRUST=false #trust every newly paired device
AUTOSCAN=false #immediately start scanning when started to speed up pairing process
2021-06-20 17:19:57 +02:00
#If you want to update symbols in your statusbar add your details below:
2020-09-30 15:33:47 +02:00
bar="dwmblocks"
barsignal="4"
#locations of blacklist and hard coded list of paired devices (watch out, need to modify Makefile as well if you want to change these values and still use make install)
BLACKLIST=${XDG_CONFIG_HOMe:-$HOME/.config}/bt/blacklist
PAIRLIST=${XDG_CONFIG_HOME:-$HOME/.config}/bt/paired
ALIASLIST=${XDG_CONFIG_HOME:-$HOME/.config}/bt/alias
2021-06-20 17:19:57 +02:00
actions="$(printf 'pair\nunpair\n')"
2021-06-20 17:19:57 +02:00
[ "$AUTOTRUST" = false ] && actions="$(printf '%s\ntrust\n' "$actions")"
#Checks for necessary programs to be present. Very unlikely not to be present but let's just err on the safer side.
for prog in dmenu bluetoothctl awk cat date nl; do
if ! hash "$prog" 2>/dev/null; then
printf 'bthandler: %s: command not found\n' "$prog" >&2
exit 127
fi
done
power(){
powerstatus="$( bluetoothctl show | grep Powered | awk '{print $2}' )"
if [ "$powerstatus" = "no" ]; then
[ "$1" = on ] && bluetoothctl power on
elif [ "$powerstatus" = "yes" ]; then
[ "$1" = off ] && bluetoothctl power off
fi
}
scan(){
scanstatus="$( bluetoothctl show | grep Discovering | awk '{print $2}' )"
if [ "$1" = on ]; then
#sets variable in case scanning was no already on before the start of bt
[ -f /tmp/bt_start_scan$$ ] || start_scan="$( date +'%s' )"
if [ "$scanstatus" = "no" ]; then
bluetoothctl scan on &
start_scan="$( date +'%s' )"
fi
echo "$start_scan" > /tmp/bt_start_scan$$
elif [ "$1" = off ]; then
if [ "$scanstatus" = "yes" ]; then
bluetoothctl scan off
fi
fi
}
#Check bluetoothctl paired-devices for new devices to be hardcoded into pair list
update_pair_list(){
btctl_paired_devices="$(bluetoothctl paired-devices)"
if [ -n "$btctl_paired_devices" ]
then
btctl_not_in_list="$( echo "$btctl_paired_devices" | grep -vf "$PAIRLIST")"
[ -n "$btctl_not_in_list" ] && echo "$btctl_not_in_list" >> "$PAIRLIST"
fi
}
#start scanning as early as possible to speed up pairing process
startup(){
#remove old tmp files
for f in /tmp/*
do
case $f in
/tmp/bt_start_scan*) rm "$f";;
*) true;;
esac
done
if $AUTOSCAN
then
power on
scan on
fi
}
2021-04-23 10:12:43 +02:00
if [ "$1" = "edit" ]; then
case $2 in
2021-06-28 20:10:16 +02:00
"pairlist")${EDITOR:-vim} "$PAIRLIST";;
"blacklist")${EDITOR:-vim} "$BLACKLIST";;
"aliaslist")${EDITOR:-vim} "$ALIASLIST";;
2021-04-23 10:12:43 +02:00
*)true;;
esac
2021-06-28 20:10:16 +02:00
exit
2021-04-23 10:12:43 +02:00
fi
#Sadly needs to be run without '&' for now, since it otherwise breaks start_scan variable
startup &
update_pair_list &
# include head command here to speed up launch if too many devices are listed (long uptime and long scanning will lead to this depending on your surroundings)
# shellcheck disable=SC1091
if bluetoothctl devices | head | awk '{print "bluetoothctl info "$2}' | . /dev/stdin | grep -q "Connected: yes"
then
actions="$(printf "disconnect\n%s" "$actions")"
fi
#Compile list of all Bluetooth IDS of paired devices (from bluetoothctl and from hardcoded list)
2021-06-28 20:10:16 +02:00
bt_IDS="$( ( bluetoothctl paired-devices && cat "$PAIRLIST" ) | awk '{print $2}' | sort -u )"
#Compile list of all device Names of paired devices (from bluetoothctl and from hardcoded list)
2021-06-28 20:10:16 +02:00
paired_devices_with_id="$( ( bluetoothctl paired-devices && cat "$PAIRLIST" ) | sort -u | awk '{for (i=2; i<NF; i++) printf $i " "; print $NF}' )"
#de-alias
paired_devices="$(echo "$paired_devices_with_id" | while read -r device_line; do
id="$(echo "$device_line" | cut -d' ' -f1)"
if grep -q "$id" "$ALIASLIST"; then
grep "$id" "$ALIASLIST" | cut -d' ' --complement -f1
else
echo "$device_line" | cut -d' ' --complement -f1
fi
done)"
#paired_devices="$( ( bluetoothctl paired-devices && cat "$PAIRLIST" ) | sort -u | awk '{for (i=3; i<NF; i++) printf $i " "; print $NF}' )"
2021-06-20 17:19:57 +02:00
echo "paired_devices:$paired_devices"
disp_devices="$( echo "$paired_devices" | grep -vf "$BLACKLIST" )"
#detects current power mode of controller and adjusts options accordingly
powerstatus="$( bluetoothctl show | grep Powered | awk '{print $2}' )"
poweroption="$( echo "$powerstatus" | sed 's/yes/power off/; s/no/power on/' )"
#Don't print empty device list, removes unnecessary empty choice in dmenu
[ "$disp_devices" = "" ] && choice=$( printf "%s\n%s" "$actions" "$poweroption" | dmenu -i -p 'What BT action would you like to perform:' )
[ "$disp_devices" != "" ] && choice=$( ( echo "$disp_devices" && printf "%s\n%s" "$actions" "$poweroption" ) | dmenu -i -p 'What BT action would you like to perform:' )
cleanup(){
scan off
rm /tmp/bt_start_scan$$ 2> /dev/null
2020-09-30 15:33:47 +02:00
pkill -RTMIN+$barsignal $bar
exit 0
}
pair(){
#since this function can get called indefinitely, make sure to always be scanning and controller has power in the case that it got deactived by some other process.
power on
scan on
#check whether $SCAN_PERIOD seconds has already passed since starting scanning, if not, wait for the rest of that time.
start_scan="$(cat /tmp/bt_start_scan$$)"
2021-04-17 15:45:40 +02:00
if [ $(( $(date +'%s') - $start_scan )) -lt $SCAN_PERIOD ]; then
sleep_period="$(( $SCAN_PERIOD - $( date +'%s') + $start_scan ))"
[ "$sleep_period" -gt 1 ] && plural="s"
notify-send "Bluetooth" "Searching for devices, please wait $sleep_period second$plural"
sleep "$sleep_period"
fi
all_devices="$( bluetoothctl devices )"
if [ "$paired_devices" = "" ]; then
new_devices="$( echo "$all_devices" | awk '{for (i=3; i<NF; i++) printf $i " "; print $NF}' )"
bt_IDS="$( echo "$all_devices" | awk '{print $2}' )"
else
#echo "$paired_devices" > /tmp/paired_devices$$
filtered_devices="$( echo "$all_devices" | grep -v "$paired_devices")"
bt_IDS="$( echo "$filtered_devices" | awk '{print $2}' )"
new_devices="$( echo "$filtered_devices" | awk '{for (i=3; i<NF; i++) printf $i " "; print $NF}' )"
#rm /tmp/paired_devices$$
fi
[ "$new_devices" = "" ] && options="rescan" || options=$(echo "$new_devices" && echo 'rescan')
choice=$( echo "$options" | dmenu -l 10 -i -p 'pair with which device?' )
if [ -n "$choice" ]; then
if [ "$choice" = "rescan" ]; then
start_scan="$( date +'%s')"
echo "$start_scan" > /tmp/bt_start_scan$$
pair
else
dev_no=$( echo "$new_devices" | nl | grep "$choice" | awk '{print $1}')
dev_id=$( echo "$bt_IDS" | nl | grep -P "^.*$dev_no\t" | awk '{print $2}' )
#only attempt to connect if pairing succeeds
bluetoothctl pair "$dev_id" && ( pair_succesful=true && bluetoothctl connect "$dev_id" ) || pair_succesful=false
if $AUTOTRUST; then
bluetoothctl trust "$dev_id"
fi
#if device is not already hard coded as paired, add to paired devices list
2021-06-20 17:19:57 +02:00
if $pair_succesful && [ "$( grep "$dev_id" "$PAIRLIST")" = "" ] || [ "$(wc -l < "$PAIRLIST")" -eq 0 ]
then
echo to be added to "$PAIRLIST":
echo Device "$dev_id" "$choice"
echo Device "$dev_id" "$choice" >> "$PAIRLIST"
fi
fi
fi
}
case $choice in
"power on") bluetoothctl power on;;
"power off") bluetoothctl power off;;
"scan on") bluetoothctl power on && echo power on && sleep 2
([ -n "$TERMINAL" ] && $TERMINAL -e bluetoothctl scan on ) || st bluetoothctl scan on;;
"pair") pair;;
"unpair") choice=$( echo "$paired_devices" | dmenu -l 10 -i -p 'remove which paired device?')
if [ -n "$choice" ]; then
dev_no=$( echo "$paired_devices" | nl | grep -P "[0-9]+\t$choice$" | awk '{print $1}')
dev_id=$( echo "$bt_IDS" | nl | grep -P "^.*$dev_no\t" | awk '{print $2}' )
bluetoothctl remove "$dev_id"
#remove device to unpair from hard coded paired devices list
new_paired_list="$( grep -v "$dev_id" "$PAIRLIST" )"
if [ "$new_paired_list" != "" ]
then
echo "$new_paired_list" > "$PAIRLIST"
else
rm -rf "$PAIRLIST"
touch "$PAIRLIST"
fi
fi;;
"trust")
#search through all devices which are connected and only list those as options
# shellcheck disable=SC1091
untrusted_devices="$( awk '{print "bluetoothctl info "$2}' "$PAIRLIST" | . /dev/stdin | grep -E '(Alias:|Trusted:)' | sed -e 'N;s/\n/;/;s/^.?*Alias: //' | grep "Trusted: no" | awk -F ';' '{print $1}' )"
if [ "$( echo "$untrusted_devices" | wc -l )" -gt 0 ]
then
choice=$( echo "$untrusted_devices" | dmenu -l 10 -i -p 'remove which paired device?')
else
notify-send "Bluetooth" "No paired devices that are not trusted"
fi
if [ -n "$choice" ]; then
dev_no=$( echo "$paired_devices" | nl | grep -P "[0-9]+\t$choice$" | awk '{print $1}')
dev_id=$( echo "$bt_IDS" | nl | grep -P "^.*$dev_no\t" | awk '{print $2}' )
bluetoothctl trust "$dev_id"
fi;;
"disconnect")
#search through all devices which are connected and only list those as options
# shellcheck disable=SC1091
connected_devices="$( bluetoothctl devices | awk '{print "bluetoothctl info "$2}' | . /dev/stdin | grep -E '(Alias:|Connected:)' | sed -e 'N;s/\n/;/;s/^.?*Alias: //' | grep "Connected: yes" | awk -F ';' '{print $1}' )"
echo "$connected_devices"
#only open dmenu prompt if there is more than one connected device
if [ "$( echo "$connected_devices" | wc -l )" -gt 1 ]
then
choice=$( echo "$connected_devices" | dmenu -l 10 -i -p 'remove which paired device?')
else
choice="$connected_devices"
fi
#only there was a choice (instead of canceling the dmenu)
if [ -n "$choice" ]; then
dev_no=$( echo "$paired_devices" | nl | grep -P "[0-9]+\t$choice$" | awk '{print $1}')
dev_id=$( echo "$bt_IDS" | nl | grep -P "^.*$dev_no\t" | awk '{print $2}' )
bluetoothctl disconnect "$dev_id"
fi;;
"blacklist")
choice=$( echo "$paired_devices" | dmenu -l 10 -i -p 'blacklist which paired device from selection?')
if [ -n "$choice" ]; then
echo "$choice" >> "$BLACKLIST"
fi;;
*)
dev_no=$( echo "$paired_devices" | nl | grep -P "[0-9]+\t$choice$" | awk '{print $1}')
[ "$dev_no" != "" ] && dev_id=$( echo "$bt_IDS" | nl | grep -P "^.*$dev_no\t" | awk '{print $2}')
if [ -n "$dev_id" ]; then
power on
if bluetoothctl info "$dev_id" | grep -q "Connected: yes"
then
bluetoothctl disconnect "$dev_id"
else
bluetoothctl devices | grep -q "$dev_id" || bluetoothctl pair "$dev_id"
bluetoothctl connect "$dev_id"
fi
fi;;
esac
2020-07-10 11:39:13 +02:00
cleanup